Huawei SmartLogger2000 User Manual page 71

SmartLogger2000
User Manual

The PT1 port is used as an example.
SmartLogger to the PT100/PT1000.
Figure 4-18 Connecting to a three-wire PT100/PT1000
Figure 4-19 Connecting to a two-wire PT100/PT1000

Issue 04 (2018-04-10)
For details about the cables and cable connection operations, see the documents delivered with the
PT100/PT1000. The PT port on the SmartLogger is marked + and –. Connect cables correctly
according to the silk screens.
The EMI cannot be automatically identified. After connecting cables, log in to the embedded WebUI
and manually add the EMI. For details, see
and Connection mode to AI.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-18 and Figure 4-19
7.11.8.1 Connecting
4 Electrical Connection
show how to connect the
Devices. Set Device Type to EMI
61