Huawei SmartLogger2000 User Manual page 48

SmartLogger2000
User Manual
If you need to use a ladder to install the SmartLogger on a high position, keep balance to
protect yourself from falling down.
Figure 3-5 Hole positions and distance (unit: mm)
Step 2 Drill holes by using a hammer drill and install expansion sleeves, washers, and tapping
screws.
Figure 3-6 Drilling holes and installing expansion sleeves, washers, and tapping screws (unit:
mm)
1.
Issue 04 (2018-04-10)
Put a hammer drill with a Ф6 mm drill bit on a marked hole position vertically against
the wall and drill to a depth greater than or equal to 40 mm.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Device Installation
38