Pt Temperature Correction - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Figure 7-28 EMI (4)

7.8.5.3 PT Temperature Correction

If the temperature detected by the PT100/PT1000 is different from the actual temperature,
correct the PT temperature on the WebUI.
Before setting this parameter, ensure that:
1. The PT100/PT1000 has been connected. For details, see
2. Port number of PV module temperature, Ambient temperature, Custom 1, or Custom
Because of permission restriction, log in as Advanced User, and then choose EMI(AI) > PT
T Correction.
Issue 04 (2018-04-10)
 Master/Slave: When the SmartLogger connects to multiple EMIs, set one of them to master mode.
 Synchronize Environment Data: When Synchronize Environment Data is set to Enable, wind
speed and direction data will be sent to the inverter in a PV plant with the tracking system.
 When you need to change the preset port number, set Port number to no first, then to the required
port number.
Temperature Sensor over the PT Port
1 on the Running Param. page has been set to the connected PT port. For details, see
Connection over the AI/PT Port
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
in 4.6.3 Connecting the SmartLogger to a Split
in 7.8.5.2 Setting Running
Connecting to a PT100/PT1000
Parameters.
7 WebUI
EMI.
132