SmartLogger2000
User Manual
Figure 4-3 Removing the terminal block
Step 3 Connect cables to the terminal block and secure the cables.
Figure 4-4 Connecting cables
Step 4 Insert the terminal block into the COM port.
----End
4.4 Connecting a PE Cable to the SmartLogger
Prerequisites
The PE cable and OT terminal are available.
Issue 04 (2018-04-10)
Use a flat-head screwdriver to remove the terminal block.
Recommended PE cable: an outdoor copper-core cable with a cross sectional area of 4–6
2
mm
or 12–10 AWG
OT terminal: M6
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Electrical Connection
45