Huawei SmartLogger2000 User Manual page 93

SmartLogger2000
User Manual
Setting the IP Address
Correctly set the IP address, subnet mask, and gateway for the SmartLogger, PC, and network
devices (when connected).
Setting the LAN


Step 1 Open Internet Explorer.
Step 2 Choose Tools > Internet Options.
Step 3 Click the Connections tab and then click LAN settings.
Figure 7-1 LAN setting (1)
Issue 04 (2018-04-10)
 For Internet Explorer 10, the compatible mode is recommended.
If the SmartLogger is connected to a local area network (LAN) and a proxy server has
been set, you need to cancel the proxy server settings.
If the SmartLogger is connected to the Internet and the PC is connected to the LAN, do not
cancel the proxy server settings.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
83