Huawei SmartLogger2000 User Manual page 174

SmartLogger2000
User Manual
Because of permission restriction, log in as Advanced User. Choose Settings > Alarm
Output.
Figure 7-62 Alarm output
Table 7-11 Mapping between alarm names and inverter alarms
No. Alarm Name
1 High String
Voltage
Abnormal Invert
3
Circuit
5 Abnormal Grid
Frequency
7 Abnormal
Residual Current
9 Abnormal SPI
Communication
11 System Fault
Issue 04 (2018-04-10)
 Before linking an inverter alarm to a DO port, ensure that the DO port is not set for other purposes.
Otherwise, the setting will fail.
 After the function is enabled, the DO port status may change and the alarm output may be abnormal
if the SmartLogger restarts or powers off.
Inverter Alarm
 High String
Voltage

High DC Input
Voltage
Abnormal Inv.
Circuit
Abnormal Grid
Freq.
Abnormal
Residual Current
Abnormal SPI
Communication
System Fault
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
No. Alarm Name
2 Abnormal DC Circuit
4 Abnormal Grid Voltage
6 Low Insulation
Resistance
8 Cabinet
Overtemperature
10 Abnormal Grounding
12 Abnormal Auxiliary
Power
7 WebUI
Inverter Alarm
Abnormal DC Circuit
Abnormal Grid Voltage
Low Insulation
Resistance
Overtemperature
Abnormal Grounding
Abn. Auxiliary Power
164