Huawei 5288 V3 V100R003 User Manual page 138

5288 V3 Server
User Guide
Table 7-1 Mapping
Hard Disk Position
Front hard disks
Rear hard disks
Rear hard disks
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 If a front hard disk needs to be removed and the server is equipped with a front bezel, remove
the bezel. For details, see
Step 4 Determine the position of the hard disk (for example, a front hard disk) on the 5288 V3. See
Figure
Figure 7-10 Hard disk position
Issue 26 (2018-11-19)
7.3 (Optional) Removing the Front
7-10.
Copyright © Huawei Technologies Co., Ltd.
Panel Silkscreen
0 to 23
l With one RAID
controller card: 24 to 35
l With two RAID
controller cards: 0 to 11
HDD A0, HDD B0, HDD
A1, and HDD B1
1 Safety Instructions.
7 Replacing Parts
Slot ID
DISK0 to DISK23
l With one RAID
controller card: DISK24
to DISK35
l With two RAID
controller cards: DISK0
to DISK11
DISKA, DISKB, DISKC,
and DISKD
Bezel.
128