Installing An M.2 Sata Ssd Card - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Step 3 Power off the 5288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Step 6 Remove the chassis cover. For details, see
Step 7 Remove the cables from the M.2 SSD riser card. For details, see M.2 SSD Riser Card
Cabling in
Step 8 Remove the M.2 SSD riser card.
l
l
Step 9 Loosen the screw on the M.2 SATA SSD card using an M3 Phillips screwdriver. See step (1)
in Figure
Figure 7-124 Removing an M.2 SATA SSD card
Step 10 Lift the screw end of the M.2 SATA SSD card upwards and pull it out at a 20° to 30° angle.
See step (2) in
Step 11 Place the removed M.2 SATA SSD card in an ESD bag.
----End

7.60 Installing an M.2 SATA SSD Card

Install an M.2 SATA SSD card to replace the original one. An M.2 SSD riser card can be
configured with two M.2 SATA SSD cards. The replacement method is the same for the two
Issue 26 (2018-11-19)
2.7 Internal Cabling.
For details about how to remove an M.2 SSD riser card from the mainboard, see
Removing a PCIe Card from the
For details about how to remove an M.2 SSD riser card from a riser card, see
Removing a PCIe Card from a Riser
7-124.
Figure 7-124.
Copyright © Huawei Technologies Co., Ltd.
4.2 Powering Off the Server.
7.11 Removing the Chassis
Mainboard.
Card.
7 Replacing Parts
3.6 Removing the
Cover.
7.21.2
7.21.1
240