Removing The Internal Usb Flash Drive - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 7-52 Installing the TPM
Step 5 Tighten the screw on the TPM using a Phillips screwdriver. See step (2) in
Step 6 Install the riser card above the TPM. For details, see
Step 7 Install the chassis cover. For details, see
Step 8 Install the 5288 V3. For details, see
Step 9 Connect all internal cables such as power and network cables. For details, see
External
Step 10 Power on the 5288 V3. For details, see
----End

7.25 Removing the Internal USB Flash Drive

Remove the USB flash drive before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see
Server.
Issue 26 (2018-11-19)
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.20 Installing a Riser
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7 Replacing Parts
Figure 7-52.
Card.
Cover.
3.5 Connecting
Server.
Server.
3.6 Removing the
166