Checking The 5288 V3 - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Table 5-2
Table 5-2 Procedure for configuring the server
Step
Check the server.
Configure RAID.
Configure the basic input/
output system (BIOS).
Change the user password for
iBMC.
Install an operating system
(OS).

5.3 Checking the 5288 V3

Log in to the iBMC WebUI or CLI to check the health status of the 5288 V3. Ensure that its
health status meets the environment requirements for software installation.
Table 5-3
CLI. For details about the CLI, see
Table 5-3 Default information
Item
iBMC management
network port
information
iBMC management
system login
information
Issue 26 (2018-11-19)
describes the procedure for configuring the server.
describes the default information for logging in to the 5288 V3 iBMC WebUI or
Parameter
IP address and subnet
mask of the
management network
port
User name and
password
Copyright © Huawei Technologies Co., Ltd.
Description
l Check the board versions.
l Check for and clear server alarms.
Configure RAID for the server based on site
requirements.
NOTE
The 5288 V3 supports the following RAID controller cards:
SR120 (LSI SAS2308), SR130 (LSI SAS3008), SR430C (1
GB/2 GB, LSI SAS3108), SR630C (1 GB/2 GB, LSI SAS3108),
and SP435 (PM8060)
Configure the server BIOS, including the boot mode,
network drive, preboot execution environment (PXE)
options of the network interface card (flexible NIC), and
BIOS password.
Change the default password for iBMC.
For details, see HUAWEI Server OS Installation
HUAWEI Rack Server iBMC
Default Value
l IP address: 192.168.2.100
l Subnet mask: 255.255.255.0
l User name: root
l Password: Huawei12#$
5 Configuring the 5288 V3
Guide.
UserGuide.
95