Removing A Fan Module - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 7-28 Installing the supercapacitor tray
Step 6 Install the chassis cover. For details, see
Step 7 Install the 5288 V3. For details, see
Step 8 Connect all internal cables such as power and network cables. For details, see
External
Step 9 Power on the 5288 V3. For details, see
----End

7.15 Removing a Fan Module

Remove a fan module before replacing it with a new one or removing other components (such
as the mainboard and DVD drive).
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see
Issue 26 (2018-11-19)
Cables.
NOTE
The fan modules are hot-swappable. You can skip steps
cover without removing the server. The scenarios include but are not limited to: (1) the server is installed
on holding or adjustable guide rails and (2) the server is not installed in a cabinet.
Copyright © Huawei Technologies Co., Ltd.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
1 Safety Instructions.
Step 3 to
4.2 Powering Off the
7 Replacing Parts
Cover.
3.5 Connecting
Server.
Step 5 when you can open the chassis
Server.
143