5288 V3 Server
User Guide
2.
3.
Step 5 Loosen the screws that secure a guide rail. See
Figure 3-32 Removing an L-shaped guide rail
Step 6 Remove the other guide rail on the opposite side in the same way.
----End
3.6.2 Removing a Server and Adjustable Guide Rail
Step 1 Wear an ESD wrist strap or ESD gloves. For details, see
Step 2 Power off the server. For details, see
Step 3 Disconnect all power cables and signal cables from the server.
Step 4 Remove the server.
1.
Issue 26 (2018-11-19)
Pull out the server along the guide rails away from the cabinet. See (2) in
Place the removed server on an ESD platform.
NOTE
Remove power cables first to prevent damage or injury caused by static electricity.
Loosen the captive screws on the server panel using a screwdriver. See (1) in
3-33.
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the 5288 V3
Figure
3-32.
1 Safety
4 Powering On and Off the
Figure
3-31.
Instructions.
Server.
Figure
82