Huawei 5288 V3 V100R003 User Manual page 284

5288 V3 Server
User Guide
Step 4 Run the badblocks -swft 0 drive letter command to erase data from the hard disk.
For example, to erase data from HD1, whose drive letter is /dev/sdb, run the following
command:
badblocks -swft 0 /dev/sdb
Figure 9-36 Erasing data
Step 5 Remove the hard disk.
For details, see
----End
Removing Data from a microSD Card by Using Toolkit
Step 1 Download and decompress the Toolkit package FusionServer Tools-Toolkit-Vxxx.zip, and
obtain the image FusionServer Tools-Toolkit-Vxxx.iso.
Step 2 Log in to the iBMC WebUI, choose Configure > Boot Option, set the boot medium to DVD-
ROM, and click Save.
The Boot Option page is displayed.
Step 3 Open the Remote Virtual Console.
For details, see
Step 4 Click
The screen shown in
Figure 9-37 Virtual DVD-ROM drive
Step 5 Select Image File and click Browse.
The Open dialog box is displayed.
Issue 26 (2018-11-19)
NOTE
l The drive letters vary depending on the type of the storage media. Confirm the drive letter of the
storage medium before erasing data from it.
l The data erase operation takes time.
l If the badblocks -swft 0 command fails, contact Huawei technical support.
7.5 Removing a Hard
NOTE
After data is erased, do not restart or remove and reinstall the server. Otherwise, data will be reloaded to
the hard disks when the server restarts.
9.7 Logging In to the Remote Virtual
on the toolbar.
Figure 9-37
Copyright © Huawei Technologies Co., Ltd.
Disk.
Console.
is displayed.
9 Common Operations
274