Huawei 5288 V3 V100R003 User Manual page 19

5288 V3 Server
User Guide
l
l
l
l
Figure 2-4
Figure 2-4 Rear panel of a server with four NVMe PCIe SSDs
1
3
5
7
9
11
13
15
17
Issue 26 (2018-11-19)
You can configure two rear 2.5-inch or 3.5-inch hard disks in position 1 shown in
2-3. The hard disks are numbered A0 and B0 from top to bottom.
You can configure one riser card and two rear 2.5-inch hard disks, or two rear 3.5-inch
hard disks on I/O module in position 4 shown in
numbered A1 and B1 from top to bottom.
I/O module supports only one riser card if the server with dual-CPU configuration is not
equipped with rear hard disks. One riser card provides two or three PCIe slots.
You can configure a GE or 10GE flexible NIC in position 16 in
The rear hard disks in position 18 shown in
– Numbered 24 to 35 from top to bottom and from left to right when the server is
equipped with one RAID controller card
– Numbered 0 to 11 from top to bottom and from left to right when the server is
equipped with two RAID controller cards
shows the rear panel of a 5288 V3 with four NVMe PCIe SSDs.
Rear hard disk
Hard disk activity indicator
UID indicator
I/O module
Connectivity status indicator
Serial port
PSU indicator
NVMe PCIe SSD yellow indicator
PSU 2
Copyright © Huawei Technologies Co., Ltd.
Figure 2-3. The hard disks are
Figure
Figure 2-3 are numbered as follows:
2 Hard disk fault indicator
4 PCIe slot
6 USB 3.0 port
8 Data transmission status indicator
10 VGA port
12 PSU port
14 PSU 1
16 NVMe PCIe SSD green indicator
18 NVMe PCIe SSDs (numbered 32 to 35
from left to right and from top to
bottom)
2 Product Overview
Figure
2-3.
9