Removing The Supercapacitor (Standard Raid Controller Card) - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 7-62 Removing the supercapacitor
Step 10 Vertically lift the trans flash module (TFM) out of the RAID controller card. See step (2) in
Figure
Step 11 Remove the cable between the supercapacitor and the TFM. See step (3) in
Step 12 Horizontally open the plastic latches that secure the supercapacitor. See step (4) in
7-62.
Step 13 Exert even force to lift the supercapacitor out of the server. See step (5) in
Step 14 Place the removed supercapacitor in an ESD bag.
----End
7.34 Removing the Supercapacitor (Standard RAID
Controller Card)
Remove the supercapacitor before replacing it with a new one.
When LSI SAS3108 or PM8060 RAID controller cards are configured, supercapacitors can be
configured to provide extra power. Before removing a supercapacitor, power off the server.
Pay attention to electrical safety.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Issue 26 (2018-11-19)
7-62.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
7 Replacing Parts
Figure 7-62.
Figure
Figure 7-62.
177