Internal Cabling - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
11
13
15
17
19
21
23
25
27
29
31

2.7 Internal Cabling

This topic describes the internal cabling rules for your reference.
Storage Signal Cabling
The ports on an RAID controller card may look different from the picture in this topic,
depending on the card model.
l
Issue 26 (2018-11-19)
Rear hard disk backplane power
connector (J28 PWR CONN2)
RAID controller card (J44)
Right mounting ear connector (J43)
Fan 2 connector (J132)
USB 3.0 port (J53)
Front hard disk backplane signal
connector (J1003 HDD BP CONN)
SATA/SATADOM 1 (J37)
PSU backplane connector (J31)
TPM CONN (J35)
System battery
Riser card slot (corresponding to CPU 2,
J3-J1005)
NOTE
This section uses a RAID controller card on the mainboard as an example to describe how to connect
cables to the card. The method for connecting cables to a standard RAID controller card is the same as
that for connecting cables to a RAID controller card on the mainboard.
Signal cables to the front hard disk backplane
Copyright © Huawei Technologies Co., Ltd.
12 Jumper (J36)
NOTE
COM_SW pins are used for changing
the serial port direction, and
CLR_BMC_PW pins are used for
restoring the default iBMC settings.
14 Fan 4 connector (J130)
16 Fan 3 connector (J131)
18 Fan 1 connector (J133)
20 Rear hard disk backplane power
connector (J30 PWR CONN1)
22 Left mounting ear connector (J42)
24 SATA/SATADOM 2 (J38)
26 Rear hard disk backplane power
connector (J29 PWR CONN3)
28 SoftRAID key (J51)
30 Dual-SD card module (J57 SD
board)
- -
2 Product Overview
32