Removing The Mainboard - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 7-81 Installing a DIMM
Step 6 Install the air duct. For details, see
Step 7 Install the supercapacitor if it is required. For details, see
(RAID Controller
Step 8 Install full-height full-length riser cards if they are required. For details, see
Riser
Step 9 Install the chassis cover. For details, see
Step 10 Install the 5288 V3. For details, see
Step 11 Connect all internal cables such as power and network cables. For details, see
External
Step 12 Power on the 5288 V3. For details, see
----End

7.41 Removing the Mainboard

Remove the mainboard before replacing it with a new one.
Procedure
Step 1 Confirm the iBMC and BIOS configurations with the customer for quick recovery after
replacing the motherboard.
Step 2 Log in to the iBMC and record the firmware (iBMC, BIOS, and CPLD) versions of the
mainboard to be replaced. (Choose Information > System Info > Mainboard Info on the
iBMC WebUI or run the ipmcget -d version command on the iBMC CLI.)
Step 3 (Optional) Export the iBMC and BIOS configuration files. Then you can quickly restore the
configurations of the server by importing the iBMC and BIOS configuration files after the
Issue 26 (2018-11-19)
Card).
Card.
Cables.
Copyright © Huawei Technologies Co., Ltd.
7.14 Installing the Air
7.35 Installing the Supercapacitor
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
7 Replacing Parts
Duct.
7.20 Installing a
Cover.
3.5 Connecting
Server.
196