Logging In To The Ibmc Webui - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
Figure 9-2 iBMC Configuration
----End
Querying the IP Address on the iBMC CLI
Step 1 Log in to the iBMC CLI.
For details, see
Step 2 Run the ipmcget –d ipinfo command.
For details, see
----End

9.2 Logging In to the iBMC WebUI

Log in to the iBMC WebUI using a PC that has Windows 7 and Internet Explorer 8.0
installed.
Before using the remote control function, ensure that the OS, browser, and Java Runtime
Environment (JRE) of the required versions have been installed on the local PC. For details
about software versions, see
Ensure that the local PC meets the following networking conditions:
l
l
Issue 26 (2018-11-19)
9.3 Logging In to the iBMC
HUAWEI Rack Server iBMC User
The local PC is connected to the iBMC management network port on the server by using
a network cable.
The IP addresses of the local PC and the iBMC management network port are on the
same network segment.
Copyright © Huawei Technologies Co., Ltd.
CLI.
HUAWEI Rack Server iBMC User
9 Common Operations
Guide.
Guide.
246