Logging In To A Server Over A Network Port Using Putty - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
If the login is successful, the server host name is displayed on the left of the prompt.
----End
9.6 Logging In to a Server over a Network Port Using
PuTTY
Use PuTTY to remotely log in to a server over a local area network (LAN) and configure and
maintain the server.
Ensure that the following requirements are met:
l
l
l
l
Procedure
Step 1 Set an IP address and a subnet mask or add route information for the PC to communicate with
the server.
Step 2 On the PC command-line interface (CLI), run the following command to check whether the
server is reachable:
Ping Server IP address
Step 3 Double-click PuTTY.exe.
The PuTTY Configuration window is displayed, as shown in
Issue 26 (2018-11-19)
The local PC is connected to the management network port of the server through a
network cable.
PuTTY is installed.
You can download PuTTY from chiark website. You are advised to use the latest version
of PuTTY, otherwise you may fail to log in to the server.
IP address of the server.
User name and password for logging in to the server.
Copyright © Huawei Technologies Co., Ltd.
9 Common Operations
Figure 9-16.
260