Removing An Sd Card Board - Huawei 5288 V3 V100R003 User Manual

5288 V3 Server
User Guide
2.
Step 8 Install the chassis cover. For details, see
Step 9 Install the 5288 V3. For details, see
Step 10 Connect all internal cables such as power and network cables. For details, see
External
Step 11 Power on the 5288 V3. For details, see
----End

7.49 Removing an SD Card Board

Remove a SD card board before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.
Step 3 Power off the RH1288 V3. For details, see
Issue 26 (2018-11-19)
Figure 7-103 Installing a mezzanine SD card
Tighten the two screws. See step (2) in
Cables.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-103.
7.12 Installing the Chassis
3.4 Installing the Server.
4.1 Powering On the
1 Safety Instructions.
4.2 Powering Off the
7 Replacing Parts
Cover.
3.5 Connecting
Server.
Server.
219