Huawei 5288 V3 V100R003 User Manual page 251

5288 V3 Server
User Guide
M.2 SATA SSD cards. An M.2 SATA SSD card using the external SATA1 port is used as an
example in this topic.
Procedure
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Remove the M.2 SATA SSD card to be replaced. For details, see
SATA SSD
Step 3 Take the spare M.2 SATA SSD card out of its ESD bag.
Step 4 Slot the M.2 SATA SSD card into the M.2 SSD riser at a 20° to 30° angle and position it
horizontally. See step (1) in
Figure 7-125 Installing an M.2 SATA SSD card
Step 5 Tighten the screw on the M.2 SATA SSD card. See step (2) in
Step 6 Install the M.2 SSD riser card.
l
l
Step 7 Connect the cable to the M.2 SSD riser card. For details, see M.2 SSD Riser Card Cabling
in 2.7 Internal
Step 8 Install the chassis cover. For details, see
Step 9 Install the 5288 V3. For details, see
Step 10 Connect all internal cables such as power and network cables. For details, see
External
Issue 26 (2018-11-19)
Card.
For details about how to install an M.2 SSD riser card on the mainboard, see
Installing a PCIe Card on the
For details about how to install an M.2 SSD riser card on a riser card, see
Installing a PCIe Card on the Riser
Cabling.
Cables.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Instructions.
Figure 7-125.
Mainboard.
Card.
7.12 Installing the Chassis
3.4 Installing the
7.59 Removing an M.2
Figure 7-125.
Cover.
Server.
7 Replacing Parts
7.22.2
7.22.1
3.5 Connecting
241