Panasonic LP-400 Series External Control Manual page 101

5. For GS1 DataBar Standard & Truncated, GS1 DataBar Limited and GS1 DataBar Expanded (Including
when these codes are 1D part of the composite code.)
Data length : 50-byte (LP-V series), 47-byte (LP-400/LP-W series)
Data
Name length
[byte]
Bar code No. 1
Area No. 1
Code type 2
Human readable
1
text
Inversion 1
Bar code height 7
Module width 5
X position 8
Y position 8
Tilt angle 7
Laser power
3
correction
Scan speed
3
correction
(Laser pulse
cycle correction)
(3)
(Only for LP-V
series)
* For the detail of the model type, refer to "Target laser marker" (P.8).
Description
"0"–"7"
"0"–"9", "A"–"F"
"30": GS1 DataBar STD & Truncated
"33": GS1 DataBar Limited
"34": GS1 DataBar Expanded
"40": GS1 DataBar STD & Truncated CC-A
"43": GS1 DataBar Limited CC-A
"44": GS1 DataBar Expanded CC-A
"50": GS1 DataBar STD & Truncated CC-B
"53": GS1 DataBar Limited CC-B
"54": GS1 DataBar Expanded CC-B
"0": Invalid
"2": Valid
"0": Do not invert
"1": Invert
"2": Invert with guard pattern
Model type* Setting range [mm]
LP-V10 "001.000"–"090.000"
LP-4x0 "001.000"–"110.000"
LP-4x5/LP-V15 "001.000"–"160.000"
LP-4x1/LP-W "001.000"–"055.000"
"0.050"–"1.000" [mm]
Model type* Setting range [mm]
LP-V10 "-045.000"–"+045.000"
LP-4x0 "-055.000"–"+055.000"
LP-4x5/LP-V15 "-080.000"–"+080.000"
LP-4x1/LP-W "-027.500"–"+027.500"
"-180.00"–"+180.00" [°]
"000"–"200" [%]
"005"–"500" [%]
"050"–"200" [%]
ME-LP400V-EX-6
Remarks
Specifies which area part is the marking
position of the concatenated marking on
the flying object.
In case of marking static object, specify
"0".
Set the larger value than "Line width" in
laser setting screen.
Specifies the center coordinate of the
code.
• The correction ratio is calculated
using the value set at the laser setting
as 100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse Cycle
Correction.
101