Panasonic LP-400 Series External Control Manual page 135

⿎ Flying object wait : MWT
Sets the waiting time for marking corresponding to the line speed for flying object marking.
• Setting / Readout data of flying object wait
Sub
STX MWT
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of flying object wait
STX MWT R
Data
Name length
[byte]
Flying object wait 6
⿎ Line speed : LSP
Sets the line speed in flying object marking.
• Setting / Readout data of line speed
Sub
STX LSP
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of line speed
STX LSP R
Data
Name length
[byte]
Line speed 7
* For the detail of the model type, refer to "Target laser marker" (P.8).
[Flying object wait]
6-byte
(Check sum) Delimiter
Description
"000.00"–"500.00" [ms]
[Line speed]
7-byte
(Check sum) Delimiter
Description
Model type* Setting range [m/min.]
LP-V10/LP-V15/
LP-430/LP-435/ "000.060"–"240.000"
LP-420/LP-425
LP-W/LP-431/
LP-421
LP-410
LP-411 "000.060"–"085.000"
ME-LP400V-EX-6
(Check
Delimiter
sum)
Available only when the moving direction of marking
object is other than "still".
(Check
Delimiter
sum)
The speed with which the object to be
marked passes is indicated, available
only when the traveling direction is
"000.060"–"120.000" other than "still" and encoder signal is
"OFF".
"000.060"–"170.000"
Remarks
Remarks
135