Select File - Panasonic LP-400 Series External Control Manual

2-4-4 Select file

ON
SELECT 0 to 2 IN
OFF
ON
D0 to D15 IN
OFF
ON
SET IN
OFF
ON
TRIG.IN
OFF
ON
READY OUT
OFF
ON
MARKING OUT
OFF
ON
SET OK OUT
OFF
Item Time
T1 0.5ms or more
T2 0ms or more
T3 2 to 510ms
T4 ―
T5 0ms or more
T6 10ms or more
Input SELECT 0 to 2 as the table below.
Number input target
File No.
Reference
• If marking is still being performed at the time SET input is turned to ON, the file will be changed after marking is
completed.
• TRIG.IN is acceptable while the READY is turned to ON.
48
T1
T2
T4
T3
Remarks
After a lapse of 0.5ms or more from specifying SELECT 0 IN to SELECT 2 IN and D0 IN
to D15 IN, turn on SET IN.
Keep the input until the SET OK is turned to ON.
One-shot output. Set the output time on the environment setting screen. There is a
margin for the setting value.
• When laser pumping is completed
Period for creating marking data. It varies depending on the quantity of data to be
marked.
• When laser pumping is not completed
Period for creating marking data or period until the laser pumping is completed. The
longer one of the two above is employed.
To input the next file number right after TRIGGER IN, input SET IN after MARKING OUT
turns ON.
Keep the ON status for 10ms or more.
SELECT 0 (No. 20)
OFF
ME-LP400V-EX-6
T1
SELECT 1 (No. 21)
OFF
T5
T6
T2
T4
SELECT 2 (No. 22)
OFF