Panasonic LP-400 Series External Control Manual page 98

2. For data matrix code / GS1 data matrix code (Data length: 42-byte)
Data
Name length
[byte]
Bar code No. 1
Area No. 1
Code type 2
Data input mode 1
Number of row 2
Number of
2
column
X position 8
Y position 8
Rotation angle 7
Module H. 5
Module W. 5
*1 : Available combination of number of row and column Auto:
Auto: 00 × 00
Square: 10 × 10, 12 × 12, 14 × 14, 16 × 16, 18 × 18, 20 × 20, 22 × 22, 24 × 24, 26 × 26,
32 × 32, 36 × 36, 40 × 40, 48 × 48, 52 × 52, 64 × 64, 72 × 72, 80 × 80, 88 × 88
Rectangle: 08 × 18, 08 × 32, 12 × 26, 12 × 36, 16 × 36, 16 × 48
*2 : *For the detail of the model type, refer to "Target laser marker" (P.8).
98
Description
"0"–"7"
"0"–"9", "A"–"F"
"20": Data matrix (ECC200)
"21": GS1 Data Matrix without human
readable text
"22": GS1 Data Matrix with human readable
text
"0": Binary
"1": Kanji
"00", "08"–"88"
(Combination of number of row and column
is limited. *1)
"00", "10"–"80"
(Combination of number of row and column
is limited.*1)
Model type*2 Setting range [mm]
LP-V10 "-045.000"–"+045.000"
LP-4x0 "-055.000"–"+055.000"
LP-4x5/LP-V15 "-080.000"–"+080.000"
LP-4x1/LP-W "-027.500"–"+027.500"
"-180.00"–"+180.00" [°]
"0.001"–"1.000" [mm]
ME-LP400V-EX-6
Remarks
Specifies which area part is the marking
position of the concatenated marking on
the flying object.
In case of marking static object, specify "0".
For the GS1 data matrix, select always "0".
Number of module in Y direction
Specifying "00" for number of both row and
column encodes with the minimum size
(square).
Number of module in X direction
Specifying "00" for number of both row and
column encodes with the minimum size
(square).
Specifies the center coordinate of the
code.
Interval of module in longitudinal direction.
Interval of module in lateral direction.