Panasonic LP-400 Series External Control Manual page 113

Name
Laser power correction
Scan speed correction
(Laser pulse cycle
correction)
(Only for LP-V series)
* For the detail of the model type, refer to "Target laser marker" (P.8).
Reference
• Use the CDC Command for the condition setting of VEC file. The common parameters with VEC and DXF files are
changed by either CDC/CDD command.
Data
length Content
[byte]
3 "000"–"200" [%]
3 "005"–"500" [%]
(3) "050"–"200" [%]
ME-LP400V-EX-6
Remarks
• The correction ratio is calculated
using the value set at the laser
setting as 100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse Cycle
Correction.
113