Panasonic LP-400 Series External Control Manual page 118

⿎ Arbitrary point radiation coordinate and time : PRD
Sets arbitrary point radiation X/Y coordinates, radiation time and laser power correction ratio.
• Setting of arbitrary point radiation coordinate and time
STX PRD S
• Setting of radiation time, and laser power correction only
STX PRD S
• Delete of arbitrary point radiation condition
STX PRD S
• Readout request of arbitrary point radiation coordinate and time
STX PRD R
• Readout data
STX PRD A
When there is no setting data in the selected line, [Radiation Time], [Laser Power Correction], [X Coordinate] and [Y
Coordinate] fields are not existed.
Data length
Name
[byte]
Point radiation
condition No.
Line No.
Start line
End line
Radiation time
Laser power
correction
X position
Y position
* For the detail of the model type, refer to "Target laser marker" (P.8).
Reference
• The coordinate numbers that can be set or read out at once are max. 50 points.
118
[Point radiation condition No.] [Start line] [Radiation time]
[Laser power correction] [X position] [Y position] [• • •]
[X position] [Y position]
15+16n-byte
[Point radiation condition No.] [Line No.] [Radiation time]
[Laser power correction]
15-byte
[Point radiation condition No.] [Start line] [End line]
[Point radiation condition No.] [Line No.]
[Point radiation condition No.] [Line No.] [Radiation time]
[Laser power correction] [X position] [Y position]
Max. 31-byte
Description
2 "00"–"15"
3 "000"–"049"
3
"000"–"049"
3
7 "00000.1"–"99999.9" [ms]
3 "000"–"200" [%]
Model type*
8
LP-V10
LP-4x0
LP-4x5/LP-V15
8
LP-4x1/LP-W
8-byte
5-byte
Setting range [mm]
"-045.000"–"+045.000"
"-055.000"–"+055.000"
"-080.000"–"+080.000"
"-027.500"–"+027.500"
ME-LP400V-EX-6
(Check
Delimiter
sum)
(Check
Delimiter
sum)
(Check
Delimiter
sum)
(Check
Delimiter
sum)
(Check
Delimiter
sum)
Remarks
The correction ratio is calculated
using the value set at the laser setting
as 100%.