Panasonic LP-400 Series External Control Manual page 125

⿎ External offset condition : OFC
Sets input conditions of "External Offset Function" to switch coordinates using I/O input.
• Setting / Readout data of external offset condition
Sub
STX OFC
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of external offset condition
STX OFC R
Name Data length [byte]
External offset
⿎ External offset coordinates : OFS
Sets offset coordinates used for "External Offset Function" to switch coordinates using I/O input.
• Setting / Readout data of external offset coordinates
Sub
STX OFS
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of external offset coordinates
STX OFS R
Data length
Name
[byte]
Parallel data No. 3
X offset 8
Y offset 8
θ offset 7
* For the detail of the model type, refer to "Target laser marker" (P.8).
[External offset]
1-byte
(Check sum) Delimiter
Description
"0": no use
1 "1": low 4-bit
"2": low 8-bit
[Parallel data No.] [X offset] [Y offset] [θ offset]
26-byte
[Parallel data No.]
3-byte
Description
"000"–"255"
Model type*
LP-V10 "-045.000"–"+045.000"
LP-4x0 "-055.000"–"+055.000"
LP-4x5/LP-V15 "-080.000"–"+080.000"
LP-4x1/LP-W "-027.500"–"+027.500"
"-180.00"–"+180.00" [°]
ME-LP400V-EX-6
(Check
Delimiter
sum)
(Check
Delimiter
sum)
The parallel data number in which offset
is set is indicated.
Setting range [mm]
The rotation offset is indicated.
Remarks
(Check
Delimiter
sum)
Remarks
125