I/O Terminal Block; I/O Connector - Panasonic LP-400 Series External Control Manual

2-1-1 I/O terminal block

I/O terminal block of the NPN type
[LP-4xx(T)U / LP-4xx(T)U-A / LP-4xxS9(T)U /
LP-4xxS9(T)U-A / LP-VxxU / LP-VxxU-A / LP-W series]
Reference
• A2, A11, B2 and B11 on the I/O terminal block have different signals depending on the controller type of NPN or PNP.
• The connector type of I/O terminal block is as follows. (When the terminal block is removed.)
Laser marker side connector type
User side connector type

2-1-2 I/O connector

Laser marker side
(Female connector)
Laser marker side connector type
User side connector type
[Attached item] User side connector
[Attached item] User side connector cover
26
I/O terminal block of the PNP type
[LP-4xx(T)U-C / LP-4xxS9(T)U-C / LP-VxxU-C]
Female D-sub 25 pin (Screw type: M2.6, female)
Male D-sub 25 pin (Screw type: M2.6, male)
User side: Attached accessory
(Male connector)
Female D-sub 37 pin (Screw type: M2.6, female)
Male D-sub 37 pin (Screw type: M2.6, male)
HDCB-37PF (05)
HDC-CTH1 (10)
ME-LP400V-EX-6
* This view is facing the connecting surface.
Hirose Electoric Co., Ltd.