Panasonic LP-400 Series External Control Manual page 122

⿎ Character condition : STC
Sets the condition for marking character string per line.
• Setting / Readout data of character condition
Sub
STX STC
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of character condition
STX STC R
1. When marking shape is straight line/proportional/justify
Data length : 75-byte (LP-V series), 72-byte (LP-400/LP-W series)
Data
Name length
[byte]
Character
2
condition No.
Area No. 1
Start line 2
End line 2
Marking
1
shape
Alignment 1
Character
7
height
Character
7
width
X position 8
Y position 8
122
[Character condition No.] [Area No.] [Start line] [End line]
[Marking shape] [Vary with the marking shape]
[Font No.] [Bold line width] [Laser power correction]
[Scan speed correction] [Laser pulse cycle correction]
Max. 83-byte (LP-V series),
Max. 80-byte (LP-400/LP-W series)
[Character condition No.]
2-byte
Description
"01"–"60"
"0"–"9", "A"–"F"
"01"–"60" [row]
("51"–"60": common setting lines)
"0": straight line
"1": Proportional
"2": Justify
"0": left
"1": center
"2": right
Model type* Setting range [mm]
LP-V10 "000.100"–"090.000"
LP-4x0 "000.100"–"110.000"
LP-4x5/LP-V15 "000.100"–"160.000"
LP-4x1/LP-W "000.100"–"055.000"
Model type* Setting range [mm]
LP-V10 "-045.000"–"+045.000"
LP-4x0 "-055.000"–"+055.000"
LP-4x5/LP-V15 "-080.000"–"+080.000"
LP-4x1/LP-W "-027.500"–"+027.500"
ME-LP400V-EX-6
(Check
Delimiter
sum)
Remarks
Specifies which area part is the marking
position of the concatenated marking on the
flying object.
In case of marking static object, specify "0".
The start/end line of character string for
marking with this condition is indicated.
Sets the coordinate (X/Y) of the character.
The base position of the coordinate varies
from "alignment" setting:
Left: lower left of the first character
Center: the center of the string
Right: lower right of the last character
(Check
Delimiter
sum)