Panasonic LP-400 Series External Control Manual page 81

⿎ Marking status transmission permission : MST
Enables automatic response of marking result (e.g. normal end, and error occurrence, etc.) at the end of marking.
• Setting / Readout data of marking status transmission permission
Sub
STX MST
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of transmission permission/prohibition of response
STX MST R
Data
Name length
[byte]
Trans-mission
permission/ 1
prohibition
• Data transmission after setting marking status transmission permission
The status which shows if the marking operation is normally finished is transmitted when receiving a marking trigger from I/O
or RS-232C/Ethernet after marking status transmission permission is set.
STX MST A
Data
Name length
[byte]
Status 4
Reference
• When marking status function is used, set the transmission permission before every shifting to the remote mode.
• When the remote mode is released, the marking status transmission is returned to the default transmission prohibition.
• For the error code at marking operation, refer to "Error Indication" (P.151).
[Trans-mission permission/prohibition]
1-byte
(Check sum) Delimiter
Description
"0": Transmission prohibited
"1": Transmission permitted
[Status]
(Check sum)
4-byte
Description
"0000": Marking is normally completed
"E001"–"E999": Error code at marking operation
ME-LP400V-EX-6
(Check sum) Delimiter
Remarks
Delimiter
Remarks
The status after marking operation
is indicated.
81