Panasonic LP-400 Series External Control Manual page 107

⿎ Human readable text : BRV
Sets the marking condition for the Human Readable Text to be added to a bar code or 2D code.
• Setting / Readout data of human readable text
Sub
STX BRV
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of human readable text
STX BRV R
Reference
• A one-byte character which can not be converted to one-byte, including Katakana, is read out using the corresponding
double-byte character (Shift-JIS code).
Data
Name length
[byte]
Bar code No. 1
Setting section 1
X position 8
Y position 8
Character
7
height
Character width 7
Character
7
interval
Font 1
Laser power
3
correction
Scan speed
3
correction
(Laser
pulse cycle
correction) (3)
(Only for LP-V
series)
[Bar code No.] [Setting section]
[Human readable text setting]
Max. 57-byte (LP-V series),
Max. 54-byte (LP-400/LP-W series)
[Bar code No.] [Setting section]
2-byte
Description
"0"–"7"
"1": Bar code, GS1 Data Matrix, or 1D side
of Composite code
"2": 2D side of Composite code
Model type* Setting range [mm]
LP-V10 "-045.000"–"+045.000"
LP-4x0 "-055.000"–"+055.000"
LP-4x5/LP-V15 "-080.000"–"+080.000"
LP-4x1/LP-W "-027.500"–"+027.500"
Model type* Setting range [mm]
LP-V10 "000.100"–"090.000"
LP-4x0 "000.100"–"110.000"
LP-4x5/LP-V15 "000.100"–"160.000"
LP-4x1/LP-W "000.100"–"055.000"
Model type* Setting range [mm]
LP-V10 "000.000"–"090.000"
LP-4x0 "000.000"–"110.000"
LP-4x5/LP-V15 "000.000"–"160.000"
LP-4x1/LP-W "000.000"–"055.000"
"1": Character font 1
"2": Character font 2
"000"–"200" [%]
"005"–"500" [%]
"050"–"200" [%]
ME-LP400V-EX-6
(Check sum)
(Check sum) Delimiter
Remarks
When the code type is other than the
Composite code, select "1".
Specifies relative coordinate of X/Y
position of human readable text to the
center of bar code.
• The correction ratio is calculated using
the value set at the laser setting as
100%.
• With LP-400/LP-W series, nothing
should be input in Laser Pulse Cycle
Correction.
Delimiter
107