Panasonic LP-400 Series External Control Manual page 115

2. For circle (Data length: Max. 42-byte)
Data length
Name
[byte]
Processing
1
condition No.
Processing
3
element No.
Element type 1
Center X 8
Center Y 8
Radius 7
Dashed line:
Length of solid (7)
part
Dashed line:
Length of blank (7)
part
For deletion of the processing element, set the element type to straight line, and set X and Y coordinates of both start and
end points to "0".
* For the detail of the model type, refer to "Target laser marker" (P.8).
Description
"0"-"7"
"000"-"031"
"1": circle
Model type* Setting range [mm]
LP-V10 "-045.000"-"+045.000"
LP-4x0 "-055.000"-"+055.000"
LP-4x5/LP-V15 "-080.000"-"+080.000"
LP-4x1/LP-W "-027.500"-"+027.500"
Model type* Setting range [mm]
LP-V10 "000.010"-"045.000"
LP-4x0 "000.010"-"055.000"
LP-4x5/LP-V15 "000.010"-"080.000"
LP-4x1/LP-W "000.010"-"027.500"
Model type* Setting range [mm]
LP-V10 "000.010"-"090.000"
LP-4x0 "000.010"-"110.000"
LP-4x5/LP-V15
"000.010"-"160.000"
LP-4x1/LP-W "000.010"-"055.000"
Model type* Setting range [mm]
LP-V10 "000.000"-"090.000"
LP-4x0 "000.000"-"110.000"
LP-4x5/LP-V15 "000.000"-"160.000"
LP-4x1/LP-W "000.000"-"055.000"
ME-LP400V-EX-6
Remarks
Set the larger value than "Line width" in
laser setting screen.
To make it not dashed line (solid line),
input nothing.
To make it not dashed line (solid line),
input nothing.
115