Panasonic LP-400 Series External Control Manual page 83

⿎ File change [No. specified] : FNO
Specifies the file No. to change the file.
• Change file No.
Read out the file of specified number.
Sub
STX FNO
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of file No.
STX FNO R
Name Data length [byte]
File No.
⿎ File change [Comment specified] : FNN
Specifies the file name (comment) to change the file.
• Change file No.
Changes file No. according to the file name (comment).
STX FNN S
Name Data length [byte]
File name Max. 20
Reference
• When two or more of the same file names exists, the file with the smaller no. is selected.
⿎ File overwriting registration : FOR
Overwrite and register the file under editing.
Overwriting is possible when the file number has been already determined.
• Overwriting of file
STX FOR S
[File No.]
4-byte
(Check sum) Delimiter
Description
"0000"–"2047"
4
"9999": new file
[File name]
Max. 20-byte
Description
Specify the file name
with 10 or less characters
of shift-JIS code, or 20 or
less characters of ASCII
code.
(Check sum) Delimiter
ME-LP400V-EX-6
(Check sum) Delimiter
The file number to be used and the file
number currently being used is indicated
at file No. change and readout of file No.
respectively.
(Check sum) Delimiter
Ex) When changing to a file name (comment) with
"ABCD", set as follows:
• When specifying the file name in shift-JIS code:
82,60,82,61,82,62,82,63(HEX)
• When specifying the file name in ASCII code:
41,42,43,44(HEX)
Remarks
Remarks
83