Lp-4X1/Lp; Model Type* Setting Range [Mm] - Panasonic LP-400 Series External Control Manual

⿎ Character condition (Shortened form) : SPC
Sets the condition for marking character string per line.
(X/Y coordinates and laser power correction ratio only)
• Setting / Readout data of character condition (shortened form)
Sub
STX SPC
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of character condition (shortened form)
STX SPC R
Data
Name length
[byte]
Condition No. 2
X position 8
Y position 8
Laser power
3
correction
* For the detail of the model type, refer to "Target laser marker" (P.8).
[Condition No.] [X position] [Y position]
[Laser power correction]
21-byte
[Condition No.] (Check
2-byte
Description
"01"–"60"
When the marking form is other than "fan
like":
Model type* Setting range [mm]
LP-V10 "-045.000"–"+045.000"
LP-4x0 "-055.000"–"+055.000"
LP-4x5/LP-V15 "-080.000"–"+080.000"
LP-4x1/LP-W "-027.500"–"+027.500"
When the marking form is "fan like":
"-300.000"–"+300.000" [mm]
"000"–"200" [%]
ME-LP400V-EX-6
(Check
Delimiter
sum)
Sets the coordinate (X/Y) of the character.
The base position of the coordinate varies
from "alignment" setting:
• Left: lower left of the first character
• Center: the center of the string
• Right: lower right of the last character
Indicates the correction value
corresponding with the marking pulse cycle
specified value here.
Delimiter
sum)
Remarks
121