Panasonic DVC PRO Studio AJ-D950P Service Manual page 929

1-1-11. COMPOSITE INPUT LEVEL ADJ.
BOARD F3 V IN
SPEC. V 1.6mV ± 0.02V
TEST POINT TP701,TP351
ADJ. VR351,VR301
Composite Color Bar
INPUT

7.5%
MODE ASSEMBLE
TAPE
M.EQ Oscilloscope
1. Observe TP701 and adjust VR351 at the point
where the sync tip just begin to saturate.
2. Adjust VR301 so that the Voltage at TP351 is
1.6mV ± 0.02V.


 
Setup 7.5%
1-1-12. COMPOSITE Y LEVEL ADJ.
BOARD F3 V IN
SPEC. V 700mV ± 7mV
TEST POINT Component Y out
ADJ. VR455
Composite Color Bar
INPUT

75%
MODE ASSEMBLE
TAPE


M.EQ
Adjust VR455 so that the Y level is 700 mV ± 7mV.
1.


 
Setup 7.5%