Panasonic DVC PRO Studio AJ-D950P Service Manual page 479

USER menu
<AUDIO>
No.
727
728
729
730
731
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
PB FADE 0000
0001
0002
EMBEDDED 0000
AUD 0001
MONITOR 0000
MIX L 0001
0002
MONITOR 0000
MIX R 0001
0002
CUE OUT 0000
SEL 0001
– E-61 –
AUTO This selects the processing method for the audio edit points
(IN point, OUT point) during playback.
CUT
0: According to the status during recording.
FADE
1: Forced CUT
2: Forced FADE
OFF This selects whether to superimpose the audio data onto the
serial output.
ON
0: Data is not superimposed.
1: Data is superimposed.
OFF This selects the mixed signal for the headphone monitor.
0: No mixing.
CH1+2
1: CH1 and CH2 are mixed and output to the left channel.
CH3+4
2: CH3 and CH4 are mixed and output to the left channel.
OFF This selects the mixed signal for the headphone monitor.
0: No mixing.
CH1+2
1: CH1 and CH2 are mixed and output to the right channel.
CH3+4
2: CH3 and CH4 are mixed and output to the right channel.
OFF This selects whether or not the cue audio signal is to be output
to the main line output in the search mode.
ON
0: CUE AUDIO is not output.
1: CUE AUDIO is output.
(This applies only when setup menu No. 721 (MONI CH
SEL) is not set to "MANU".)
Description