Panasonic DVC PRO Studio AJ-D950P Service Manual page 798

.
3-6-6 Tension Arm Offset Voltage Adjustment
Board
SERVO
Specification 2.5+/-0.05V
Test Point TP201(SERVO:F1)
Adjustment VR1(Mech. IF)
Mode EJECT
M. EQ. Digital Volt Meter
1. Set the VTR in EJECT mode and confirm the
voltage at TP201 is in the specification.
2. If it is not, adjust VR1 on the Mech. I/F Board so
that the voltage is in the specification.
S Brake Solenoid Side View
Mech.
I/F
VR2
VR1
Mech. chassis
S Brake
Solenoid
S Reel