Table of Contents
Advertisement
Setup menus
USER menu
<EDIT>
No.
308
309
310
311
312
313
314
315
316
The underline on the setting item denotes the initial setting.
(continued)
Item
Setting
Superimposed
Superimposed
No.
display
display
EDIT
0000
RPLCE4
0001
0002
0003
CH1+CH2
EDIT
0000
RPLCEC
0001
0002
0003
CONFI
0000
EDIT
0001
AUD EDIT
0000
IN
0001
AUD EDIT
0000
OUT
0001
AUTO
0000
ENTRY
0001
CF ADJ
0000
SEL
0001
RECORD
AFTER
0000
CUE-UP
0001
JOG RANGE
0000
0001
– E-54 –
N-DEF
The same type of setting as No. 305. This selects the channel
concerned when the VTR CH4 edit preset is set in compliance
CH1
with the ON or OFF presetting for the analog audio signals
CH2
designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with analog CH1 or CH2 edit preset.
This selects the channel concerned when the VTR CUE edit
N-DEF
preset is set in compliance with the ON or OFF presetting for
CH1
the analog audio signals designated by the editor or controller.
CH2
0: Not set.
CH1+2
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 ot CH2 edit preset.
OFF
This selects whether to conduct simultaneous playback while
editing is in progress.
ON
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
This selects the connection method for the digital audio edit IN
CUT
point.
FADE
0: Cut processing
1: V Fade processing
CUT
This selects the connection method for the digital audio edit
OUT point.
FADE
0: Cut processing
1: V Fade processing
DIS
This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
ENA
0: IN point is not entered.
1: IN point is entered.
This selects the CF adjustment deck with deck-to-deck
PLAYER
editing.
0: The player's edit IN/OUT points are adjusted. (reference as
the RECORDER side)
1: The recorder's edit IN/OUT points are adjusted. (reference
as the PLAYER side)
STOP
This selects the mode after cue-up operation is complete.
0: STOP mode
STILL
1: SHTL STILL mode
This sets the range of the JOG speed during 9P remote
–.43~1
operation.
–4~+4
0: Plays at –0.43 to +1 speed range
1: Plays at the ±4.1 speed range
Description
Advertisement
Chapters
Table of Contents
