Table of Contents
Advertisement
4. Set the values as follows.
C02 REC FREQ L1 -100
C04 REC FREQ L2 -100
5. Change the item C01 REC CURR L1 and C03 REC CURR L2 until
just achieve the saturation level at 5MHz
6. Adjust C02 REC FREQ L1 and C04 REC FREQ L2 so that the level at
20MHz is maximum.
7. Store the signal in the TRACE-B.
8. Adjust following items so that the waveform becomes TRACE-A of
the following figure.
Adjustment items
C01 REC CURR L1 , C03 REC CURR L2
C02 REC FREQ L1 , C04 REC FREQ L2
9. Add "+110" to the value of C01 REC CURR L1 and C03 REC CURR
L2.
(Ex. In case of -50
10. After adjustment, compare the spectrum of Master Playback and
Confidence Playback.
6.6.31. Comparison Of the Spectrum of Master PB and Confidence PB (50M Lch)
+60)
122
Advertisement
Chapters
Table of Contents
