5.6.3. Main Brake Torque Confirmation
Specification
Test Point
Mode
Tool
1. Remove the cassette compartment.
2. Attach the Adaptor (VKK1152) with the torque meter.
3. Attach the torque meter with the S Reel table and rotate it to A
direction (CW).
4. Confirm the reel torque is in the specification when the brake is
released and the reel starts rotation.
5. Confirm T Reel torque in the same way with S Reel torque.
6. Remove the Adaptor (VKK1152) and attach the adaptor with the
torque meter (VFK1191).
7. Attach the torque meter with the S Reel table and rotate it to B
direction (CCW).
8. Confirm the reel torque is in the specification when the brake is
released and the reel starts rotation.
9. Confirm T Reel torque in the same way with S Reel torque.
5.6.4. Post Height Pre-Adjustment
A: more than 80g B: more than 15g
S Reel, T Reel
EJECT (Power OFF)
VFK71(150g),VFK1191(45g),VFK1152
18