Panasonic DVC PRO Studio AJ-D950P Service Manual page 475

USER menu
<VIDEO>
No.
600
601
602
603
604
605
606
607
608
609
610
611
<Note>
612
When no optional board
(AJ-YA951) has been
installed, setup menus
No. 610 through No. 612
are not displayed.
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
INT SG 0000
0001
0002
OUT 0000
VSYNC 0001
V-MUTE 0000
SEL 0001
CC (F1) 0000
BLANK 0001
CC (F2) 0000
BLANK 0001
FREEZE 0000
SEL 0001
OUT C 0000
KILL 0001
V OUT 0000
SETUP 0001
SDI OUT 0000 COMPNT
SEL 0001 COMPST
EDH 0000
0001
P /P 0000
B R
IN LV 0001
INPUT 0000
C KILL 0001
IN FRM 0000 FORCED
DET 0001
– E-57 –
OFF
This selects whether to generate the internal signal.
0: Signal is not generated.
BB
1: The black burst is generated.
CB
2: 100% colour bars are generated.
N-VF This selects whether to float the vertical sync position of the
video output in order to align the video output phase with the
VF
input in the EE/record/edit modes.
0: Signals are not floated.
1: Signals are floated.
N-MUTE This selects whether the video output signal is set to MUTE
when LOW RF is detected during playback.
LOW RF
0: No muting. (Freeze)
1: Muting. (Set to gray.)
BLANK This selects ON or OFF for the closed caption signal in the
first field.
THRU
0: Forced blanking performed.
1: Blanking not performed.
This selects ON or OFF for the closed caption signal in the
BLANK
second field.
THRU
0: Forced blanking performed.
1: Blanking not performed.
This selects the freeze mode for still pictures.
FIELD
0: Field freeze.
FRAME
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
This selects chroma colour killer processing for the video
B/W
output signals.
COLOR
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects the composite output signal.
THRU
0: The signal is output without setup.
ADD
1: The signal is output with 7.5% setup.
<Note>
This setup menu is not displayed in the 625 mode.
This selects the SERIAL OUT signal format.
0: The component 4:2:2 signal is output.
1: The composite signal is output. (option)
OFF This selects whether to superimpose EDH onto the serial
output signals.
ON
0: EDH is not superimposed.
1: EDH is superimposed.
M II This selects the component input signal level.
0: M II level.
B-CAM
1: ß cam level.
B/W This selects colour killer processing for the video input signals.
0: The signals are forcibly processed as B/W signals.
AUTO
1: The signals are automatically processed.
This selects the conditions under which frame detection is to
be performed when signals are input.
AUTO
0: Frame detection is performed at all times.
1: Frame detection is prohibited only when non-standard
signals are input.
Description