Panasonic DVC PRO Studio AJ-D950P Service Manual page 473

Vtr/analog video interface kit

Table of Contents

The underline on the setting item denotes the initial setting.

The cumulative standby time at the same tape position increases when transmitting

programmes or otherwise using identical materials repeatedly.

The underline on the setting item denotes the initial setting.

Superimposed

Superimposed

This selects the time to be taken until the unit goes into the tape

protection mode when it is left standing in the stop or search still

(JOG/VAR/SHTL) mode. (Unit: s = second, min = minute)

This selects the operation during the tape protection mode

when the unit is left standing in the still status during the

search mode (JOG/VAR/SHTL).

0: STEP FWD.

1: HALF LOADING.

When STEP FWD is selected, the unit automatically goes into

the HALF LOADING mode when the total time for which the

unit is left standing in the still status reaches 30 minutes.

This selects whether the head drum is to be rotated when

operation is transferred to the standby OFF mode.

0: Head drum remains stationary.

1: Head drum is rotated.

This selects whether to output the VITC data to the positions

selected by VITC POS-1 in 501 and VITC POS-2 in 502.

0: Data is not output.

1: Data is output.

This sets the position where the VITC signal is to be inserted.

(The same line as for VITC POS-2 in 502 cannot be selected.)

Chapters

Table of Contents