Table of Contents
Advertisement
screws and remove the mechanism unit.
5.3.8. Removal of Fan Motor
1. Remove the Rear Jack by removing 7 screws.
2. Remove 2 screws and Power 2 connector P14 then remove the fan
motor.
3. Remove 2 screws and mother board connector P32, then remove
fan motor.
5.4. Manual Tape Eject
When a tape can not be ejected, because of Power failure or mechanical tape damage, remove
the tape manually.
1. Turns power off and remove the top panel and front upper and
13
Advertisement
Chapters
Table of Contents
