Table of Contents
Advertisement
3-7-11. Pinch Solenoid Replacement
(Removal of Pinch Solenoid)
1.
Remove the top panel.
2.
Remove the front loading unit.
3.
Remove the bottom panel.
4.
Remove 2 screws (A) and remove the Pinch
Solenoid Unit.
5.
Remove 2 screws (B) and remove the Pinch
Solenoid Angle.
6.
Remove 2 screws (C) and remove pinch solenoid
base then remove Pinch Solenoid.
(Installation of Pinch Solenoid)
1.
Install a new Pinch Solenoid as reverse order of
its removal. After installation Pinch Solenoid
Position Adjustment is necessary. (Refer to Pinch
Solenoid Position Adjustment.)
Pinch Solenoid Removal
3-7-12. Pinch Arm Unit Replacement
(Removal of Pinch Arm Unit)
1.
Remove the top panel.
2.
Remove the front loading unit.
3.
Remove the bottom panel.
4.
Disconnect the connector P20 on the Mech.
Interconnection board.
5.
Remove the Pinch Solenoid Unit.
6.
Remove 2 Screws (A) and remove the Pinch
Solenoid Unit.
7.
Remove the cut washer (B) and remove the Pinch
Solenoid Lever.
8.
Remove the cut washer (C) and remove the Pinch
Arm Unit.
(Installation of Pinch Arm Unit)
1.
Install a new Pinch Solenoid as reverse order of
its removal. After installation adjust Pinch
Solenoid Position Adjustment. (Refer to Pinch
Solenoid Position Adjustment.)
Pinch Arm Unit Replacement
Advertisement
Chapters
Table of Contents
