Panasonic DVC PRO Studio AJ-D950P Service Manual page 802

.
3-6-10 REV Tension Confirmation
Board SERVO
Specification 18+/-2gf
Test Point
TP201
Mode
STOP
Digital Volt meter
M. EQ.
VFK1188(30g Dial Tension Gauge)
1. Place the VTR into no tape loading.
2. Press the tension post by the Dial Tension
Meter to R direction in STOP mode.
3. Read the Dial Tension Meter when the
voltage is 1.2 V (REV position) at TP201,
and adjust the
Adjustment again.
4. Grew the screw A, B and C after Tension
Arm adjustment. The grew quantity at B is
half of A and C.
Tension Regulator
A
B