Table of Contents
Advertisement
.
3-6-38
RP Head Sensitivity Adjustment (50M Mode)
Specification
Sensitivity 150+/-15 (mV/um)
Mode
Playback
Test Point
(1) ATF:TP732 (2) HSW:TP722(RP HSW) (not TP723(PB HSW) (3) GND:TG510
Adjustment
SERVO Adjustment Menu:"A09 RP GAIN P"
Tape
VFM3581KM or VFM3581KL
1. Set the LISTA software in 50M Mode. Select AJ-D950 in the PC menu and displays the main menu. 25M and
50m mode can be changed by "0" key.
2. Set the VTR in Service Mode to open the service menu and select the item of " A05 RP GAIN ED" in the
"SERVO ADJUST" menu.
3. Playback a LISTA alignment tape (VFM3581KM).
4. Select the LISTA (6) ATF Error Signal Monitor and " 1.2% Speed..." and type Enter to start the software.
5. When the picture is appeared as shown in figure adjust ATF Gain so that the " Sens. Value:" is in the
Specification. To return the main menu press ESC key.
Adjustment Value
Advertisement
Chapters
Table of Contents
