Siemens LMV5 Series Basic Documentation page 124

Parameterdarstellung auf Basis der Menüstruktur AZL - Ebene «OEM» - Auslieferstand Siemens Landis&Staefa
Menu level 1 Menu level 2 Menu level 3
Configuration
124/278
Siemens Building Technologies Basic Documentation LMV51...
HVAC Products 7 Display and operating unit AZL5...
Menu level 4 Menu level 5 Menu level 6
DelayStartPrev
PostpurgeLocko
ut
MaxTmeStartRel
ConfigGeneral
AlarmStartPrev
NormDirectStart
OilPumpCouplin
g
IgnOilPumpStart
ForcedIntermit
ContinuousPurg
e
FuelTrainGas
FuelTrainOil
FuelTrainReset
FuelTrainGas
FuelTrainOil
MainsFrequency
ConfigIn/Output
Description
Time until message on start prevention and heat demand is
delivered
Postpurge in lockout position
Maximum phase time start release (timeout)
General parameters of burner control
With/without alarm in the event of start prevention and heat
demand
Normal/direct start in the event of heat demand in phase 78
Configuration for coupling the oil pump
Switch-on time of ignition and oil pump
With / without forced intermittent operation
Configuration for normal or continuous fan operation
Fuel train when firing on gas
Fuel train when firing on oil
Resetting the fuel train to invalid value
Selection of mains frequency 50 Hz/60 Hz
Configuring the inputs and outputs
Value range Access Default LMV51 LMV52
rights parameter
setting
0.4..630 s Service 35s x
0.2..63 min OEM 0.2s x
0.2..630 s OEM 120s x
Service x
Service x
deactivated Service deactivated x
activated
NormalStart OEM NormalStart x
DirectStart
Magnetcoupl OEM Magnetcoup x
Directcoupl l
on in Ph38 OEM on in Ph38 x
on in Ph22
deactivated Service activated x
activated
deactivated OEM deactivated x
activated
DirectIgniG OEM invalid x
Pilot Gp1
Pilot Gp2
LightOilLO OEM invalid x
HeavyOilHO
LO w Gasp
HO w Gasp
OEM x
OEM x
OEM x
50 Hz OEM 50 Hz x
60 Hz
OEM x
CC1P7550en
01.10.2003
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x