Siemens LMV5 Series Basic Documentation page 20

ACS450
AGG5.110
AGG5.220
AGG5.310
AGG5.630
AGG5.631
AGG5.635
AGG5.640
AGG5.641
AGG5.720
AGG5.721
AGO20...
AZL51...
AZL52...
KF8893
PLL52...
QGO20...
QRI2A2...
QRI2B2...
20/278
Siemens Building Technologies
HVAC Products
2.2 Product range overview
PC tool for convenient programming and burner settings, process visualization, data
recording, selection of AZL5... language, software update AZL5...
CAN bracket for connecting the CAN bus to the basic unit
Power transformer for CAN bus users with power characteristics matched to the
requirements of the LMV5...
Accessory set for acquisition of speed, for use with LMV51.2... and LMV52... systems,
consisting of sensor disk (50 mm diameter), sensor and mounting set
CAN bus connecting cable between basic unit and AZL5... and for short distances to
the SQM4x. Shielded 5-core cable, 500 m
CAN bus connecting cable between basic unit and AZL5... and for short distances to
the SQM4x. Shielded 5-core cable, 100 m
CAN bus connecting cable between basic unit and AZL5..., complete with connector
type 3.5 and Sub-D, 3 m
CAN bus connecting cable between basic unit and actuators or between actuators.
Shielded 5-core cable, 500 m
CAN bus connecting cable between basic unit and actuators or between actuators.
Shielded 5-core cable, 100 m
Standard connector
Extension connector set
Flue gas collector. Accessory item for QGO20... oxygen sensor for use with LMV52...
systems (refer to Data Sheet 7842)
Display and operating unit. Detached unit for front panel mounting with text display, 4 x
16 characters, 4 silicon buttons. Real time clock and e-bus interface for BACS
Display and operating unit. Detached unit for front panel mounting with text display, 4 x
16 characters, 4 buttons. Real time clock and bus interface for LMV52...systems
Demo case including LMV51.100A2, AZL51.00A1, 2 x SQM45.295A9, and AGG5.220.
Operating buttons for simulation. Electronic simulation of controlled system, burner
graphics and LEDs (refer to Operating Instructions CC1B7988)
CAN bus module for LMV52..., with QGO20..., inputs for flue gas and combustion air temperature
Oxygen sensor for LMV52... systems
Infrared flame detector. Universal flame detector for oil or gas flames. Suited for
intermittent or continuous operation, with integrated flame amplifier and prefabricated
connecting cable 180 cm. Front illumination
Infrared flame detector. Universal flame detector for oil or gas flames. Suited for
intermittent or continuous operation, with integrated flame amplifier and prefabricated
connecting cable 180 cm. Lateral illumination
Basic Documentation LMV51...
2 General
CC1P7550en
01.10.2003