Preparations And App Login - Huawei FusionModule500 V100R021C10 User Manual

FusionModule500 Smart Mini Data Center
User Manual
2.
----End

5.3.2 Preparations and App Login

Prerequisites
App operating environment requirements:
●
●
●
●
Issue 01 (2020-11-30)
Figure 5-7 WebUI login page
On the login page, enter the preset user name admin and preset password
Changeme, set the language, and click Log In.
NO TE
– After the first login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. Huawei will not be
liable for any security issues caused by your failure to change the preset password
in time or password loss after changing.
– Change the password of the user account periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event notification is configured and the password retrieval mode is
configured under user management, the password can be retrieved.
– An account is logged out due to timeout if no operation is performed within 10
minutes after system login.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
The mobile device must run Android 4.0 or later and is not the root operating
system (the operating system is not flashed).
The mobile device has sufficient battery reserve.
You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
You have prepared a PC with an IP address in the same network segment as
that of the ECC800-Pro, and the PC is connected to the WAN_1 port on the
ECC800-Pro.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
121